Pintura de epoxy a base de agua

L-01
Waterborne epoxy zinc phosphate painf

Product Overview
Primarily used as anti-corrosion and rust-proof primer for modified vehicles, automotive chassis, and all mechanical equipment in non-marine environments and chemical zones (medium corrosion protection field).

Product Features
The paint film has high density, good hardness, fast drying speed, excellent construction properties, and good adhesion, water resistance, and rust-proof performance on machined surfaces and various substrates. It exhibits high salt spray resistance, making it suitable for equipment requiring higher rust-proof performance, with good compatibility and excellent mechanical properties.

Product Use
Primarily used as anti-corrosion and rust-proof primer for modified vehicles, automotive chassis, and all mechanical equipment in non-marine environments and chemical zones (medium corrosion protection field).Color: Iron Red, Medium Gray, Dark Gray

Theoretical Paint Consumption: 1KG/Approximately 6-8 square meters

Application Methods: Spraying, Roller Coating, Brushing

Recoating Time: 5-12 hours

Construction Environment: Construction is prohibited when the ambient temperature is below 10°C or the humidity is higher than 85%. Waterproofing and anti-freezing measures should be taken for the painted areas.

 

L-02
Waterbome epoxy anticorrosive paint

L-02B Water-based Epoxy Zinc-Rich Paint L-02C Water-based Epoxy Iron Oxide Intermediate Coating (for Steel Structures)

Product Overview/Productoverview

This product is a corrosion-resistant primer with aqueous modified epoxy emulsion as the main film-forming substance. It has good film adhesion and excellent corrosion resistance.

Product Features/Productfeatures

Extremely low VOC, room temperature curing, high cost-performance ratio, fast drying, easy construction, excellent physical and mechanical properties, long pot life. It also has good salt spray and water resistance.

Product Use/Productuse

Mainly used for large space frames and steel structures in general atmospheric corrosion environments as corrosion-resistant primer, epoxy zinc-rich primer and intermediate coat (one primer + one intermediate coat can easily reach more than 150 microns dry film thickness).

Technical Parameters

Color: Iron Red, Medium Gray, Deep Gray

Theoretical Paint Consumption: 1KG/Approximately 6-8 square meters

Application Method: Spraying, Roller Coating, Brush Coating

Recoating Time: 5-12 hours

Construction Environment: Construction is prohibited when the construction environment temperature is below 5°C and humidity is above 85%. Waterproofing and anti-freezing measures should be taken for the already applied parts.

 

L-03

Waterbome epoxy anti-corrosion primer

Product Overview/Product Overview

This product is a corrosion-resistant primer with aqueous modified epoxy emulsion as the main film-forming substance, featuring excellent coating adhesion and corrosion resistance.

Product Features/Product Features

It cures at room temperature, offers high cost-performance, dries quickly, is easy to apply, has excellent physical and mechanical properties, and has a long pot life. It also exhibits good salt spray and water resistance.

Product Use/Product Use

It is used as a rust and corrosion-resistant primer for metal substrates such as large steel structures, bridges, guardrails, and mechanical equipment.

Technical Parameters

Color: Various colors

Theoretical paint consumption: 1KG/ approximately 6-8 square meters

Application method: Spraying, rolling, brushing

Overcoat time: 5-12 hours

Construction environment: Construction is prohibited when the construction environment temperature is below 5°C and humidity is higher than 85%. Waterproofing and anti-freezing measures should be taken for the painted parts.

 

ZM-01

Waterbomne alkyd antirust paint

Product Overview/Product overview

This product is a corrosion-resistant primer with aqueous epoxy emulsion as the main film-forming substance, featuring good paint film adhesion and excellent corrosion resistance.

Product Features/Product features

It has good adhesion to special substrates, is solvent-resistant and chemical medium-resistant, possesses good mechanical properties, and exhibits resistance to salt spray, salt water, etc. It dries quickly and can rapidly establish wet-on-wet compatibility with polyurethane.

Product Use/Product use

It is mainly used for corrosion protection coating of metal machined surfaces in indoor and outdoor heavy-duty corrosion environments, including agricultural machinery, engineering machinery, mining machinery parts, large oil tanks, and oil pipelines for corrosion protection.

Color: Iron Red, Medium Gray, Dark Gray

Theoretical Paint Consumption: 1KG/Approximately 6-8 square meters

Application Methods: Spraying, Roller Coating, Brushing

Recoating Time: 5-12 hours dry

Construction Environment: Construction is prohibited when the ambient temperature is below 10°C or humidity is above 85%. Waterproofing and anti-freezing measures should be taken for the painted area.

ZM-03

Waterborne epoxy top coat

Product Overview/Product overview

This product is an epoxy topcoat with aqueous epoxy emulsion as the main film-forming substance, featuring good coating adhesion and corrosion resistance.

Product Features/Product features

Suitable for spray application, fast drying speed, good hardness after full drying, and excellent corrosion resistance, water resistance, and adhesion.

Product Use/Product use

Can be used alone to meet the decoration and waterproofing requirements of general metal materials. It is suitable for decorative topcoats with high gloss requirements. When used in conjunction with aqueous epoxy anti-corrosion primer, it can enhance rust prevention performance.

Color: Various colors

Paint consumption of P theory: 1KG/ approximately 6-8 square meters

Application method: Spraying, rolling, brushing, flooding

Recoating time: 5-12 hours

Construction environment: Construction is prohibited when the construction environment temperature is below 10°C and humidity is higher than 85%. Waterproofing and anti-freezing measures should be taken for the painted parts.

ZM-04

Waterbome epoxy high salt fog anti-corrosion primer

Product Overview/Product overview

This product is a corrosion-resistant primer with aqueous epoxy emulsion as the main film-forming substance, featuring excellent coating adhesion and corrosion resistance.

Product Features/Product features

Easy to apply, excellent anti-sagging, superior adhesion, excellent salt spray performance, excellent chemical medium resistance, safe and environmentally friendly.

Product Use/Product use

High salt fog

Chemical resistance

Technical Parameters/Technical parameters

 

Color: Iron red, Medium gray, Deep gray

Theoretical paint consumption: 1KG/ approximately 6-8 square meters

Application method: Spraying, Roller coating, Brush coating

Re-coating time: 5-12 hours

Construction environment: Construction is prohibited when the construction environment temperature is below 10°C and humidity is higher than 85%. Waterproofing and anti-freezing measures should be taken for the already applied parts.

The product is mainly applicable to metal primers in various heavy-duty corrosion protection fields, suitable for corrosion protection of components such as large steel structures, bridges, ships, tower cranes, towers, oil storage tanks, truck forks, lifting booms, and wind power generation equipment.

Z1-F7

Waterbomne Epoxy zinc-rich Primer

Product Overview/Product overview
This product is a corrosion-resistant primer with aqueous epoxy emulsion as the main film-forming substance. It has good paint film adhesion and excellent corrosion resistance.

Product Features/Product features
It has excellent adhesion, high hardness, good corrosion resistance, fast drying, easy construction, safe and environmentally friendly, strong adhesion, good anti-sagging performance, water and oil resistance, and excellent overall performance.

Product Use/Product use
Excellent corrosion resistance
Anticorrosion performance
Fast drying
Quick dry

Technical Parameters/Technical parameters
Color: Gray
Theoretical paint consumption: 1KG/ approximately 6-8 square meters
Construction method: Spraying, rolling, brushing
Recoating time: 5-12 hours
Construction environment: Construction is prohibited when the construction environment temperature is below 10°C and humidity is higher than 85%. Waterproofing and anti-freezing measures should be taken for the already constructed parts.

Mainly applicable to metal primers in various corrosion-resistant environments, as配套方案 for large steel structure corrosion-resistant primers, marine equipment, bridge engineering, petrochemical industry, port machinery and other heavy-duty corrosion-resistant fields.

Z1-02

Waterbome Epoxy cloud iron intermediale paint

Product Overview/Product overview

This product is an intermediate coating with aqueous epoxy emulsion as the main film-forming substance. It has good coating adhesion and excellent corrosion resistance.

Product Features/Product features

This product is light red gray in color, with high sealing performance that can effectively block the penetration of external media into the coating. The coating is tough and dense, making it an excellent barrier-type protective coating. It has good adhesion to the primer and good compatibility with the topcoat.

Product Use/Product use

It is suitable for metal coating in heavy-duty corrosion protection fields, such as large steel structures, bridges, ships, tower cranes, and storage tanks with high corrosion requirements. When used in conjunction with high-performance primers and topcoats, it can further enhance corrosion resistance.

 

Color: Metallic Gray

Theoretical Paint Consumption: 1KG/Approximately 6-8 square meters

Application Methods: Spraying, Roller Coating, Brushing

Recoating Time: 5-12 hours

Construction Environment: Construction is prohibited if the ambient temperature is below 10°C or humidity is above 85%. Waterproofing and anti-freezing measures should be taken for the painted area.

Z1-03

Waterborne epoxy high fim thick anti-corrosion primer

Product Overview
The Sixyuan Z1-03 Water-based Epoxy Thick Coating is a two-component coating. Component A is prepared with water-based epoxy resin as the base material, incorporating special fillers and additives, through multiple precise and rigorous manufacturing processes. Component B is a hydrophilic modified organic amine resin. The product, formulated with special fillers and various functional additives, significantly enhances the coating's physical and chemical properties such as anti-sagging, water resistance, and salt spray resistance.

Product Features
High film thickness, easily exceeding 100 micrometers, saving time and labor. Excellent salt spray resistance, with good corrosion resistance, chemical medium resistance, and adhesion.

Product Application
The product is mainly suitable for metal primers in various heavy-duty anti-corrosion fields. It is applicable for rust and corrosion prevention of steel components such as port machinery, bridges, ships, tower cranes, petrochemical valves, oil storage tanks, truck forks, and lifting booms.

Color: Gray

Theoretical Paint Consumption: 1KG/Approximately 6-7 square meters

Application Method: Spraying, Roller Coating, Brush Coating

Recoating Time: 5-12 hours

Construction Environment: Construction is prohibited when the ambient temperature is below 10°C or the humidity is higher than 85%. Waterproofing and anti-freezing measures should be taken for the painted areas.